Alpine Piste UVR Resin Bound Trade Kit

Resin Bound Calculator

Check how many kits you need

£88.00 + VAT

Alpine Piste resin bound trade kit contains a mixture of 1 – 3mm and 2 – 5mm aggregate and parts A & B UV stable (UVR) resin. With its blend of white and silver aggregates, it really enhances kerb appeal, especially when used to compliment dark shades of aggregate.

Due to the UV stable resin, this surface won’t suffer from any sun damage or discolouration.

At a depth of 18mm it will cover a 3.2m² area. Please note, this will vary dependenant on the project specification.

Alpine Piste resin bound trade kit provides a porous paving solution and as such, complies with the Sustainable Urban Drainage System (SuDS). Not only is it porous, but it also leaves behind a highly durable, hard-wearing surface.

Each pack contains:
7.5kg Part A & B UVR resin component
4 x 25kg bags of Alpine Piste aggregate

Calculate the number of kits you need

Depth (mm) *

Area to cover (m2) *

Contingency *

We recommend a 10% contingency

Depth Coverage *

Number of Kits *

Contingency formular *

Total Number of Kits Required *

Delivery Criteria

We will always attempt to deliver your order on the requested delivery date, and as close to the time specified if a timed delivery has been requested, however sometimes problems can occur which are beyond our control, so we cannot guarantee this. These factors, such as increased traffic or road closures, severe weather conditions or delivery vehicle breakdowns are beyond our control and we cannot be accountable for late deliveries as a result.

View our delivery checklist to familiarise yourselves with these delivery restrictions with a view to avoiding issues that can occur during deliveries. This will ultimately save you both time and money and make the delivery process a lot smoother.

Good to Know

Check project dimensions before starting to ensure you have enough material to complete your project. We recommend a 10% contingency.

Cooler weather increases product curing time. In colder temperatures, VA5 Catalyst should be added to the resin mix to stabilise curing (UVR resin only).

Scatter surfacing with fine glass/sand particles to increase slip-resistance.

Do not lay in wet weather or temperatures below 5 degrees centigrade.

Equipment

  • Forced Action mixer
  • VA5 Catalyst
  • Flat headed squeegee
  • High torque drill with helical whisk attachment
  • Floor trowel
  • Wheel barrow
  • Fine crushed glass
  • Polythene to protect floor and line your wheelbarrow
  • Masking tape
  • White spirits & cloths
  • Tape measure/timber batons for depth gauge
  • Disposable gloves
×

Basket

Search